Zonneboog-configurator
Ontwerp en bereken je zonneboog
Kies een ontwerp, voeg de opties toe die je boot nodig heeft en zie de prijs meteen bijwerken. Draai het model met je vinger of muis. Prijzen zijn exclusief btw. We bevestigen de definitieve prijs nadat we je maten hebben gecontroleerd.
De configurator is voorlopig in het Engels.
In vier stappen naar uw offerte
- 1Ontwerp
- 2Uw gegevens
- 3Controleer uw offerte
- 4Versturen
Design
A smaller welded arch with clean lines, for up to 3 medium panels. Ideal for boats up to 45 ft.
More about Eiviva
Eiviva is a fully welded one-piece arch with clean lines. Each side is made in one plane and the top crosses straight between them. Two 1" cross members sit at the same height as the pushpit rails, and one more sits just below the top bend. Joined to the pushpit, it stands on the pushpit's own deck fittings, so the deck needs no new holes. Cables run inside the tubes and go into the boat through hollow base plates.
- Height
- Up to 1.8 m
- Width
- 2 to 3.2 m
- Feet apart, front to back
- 450 to 750 mm
- Tube
- 38 mm, mirror polished 316 stainless steel
- Panels
- Up to 3 medium panels, about 250 W each
- Weight
- 30 to 50 kg
- Suits
- Ideally boats up to 45 ft
Width
The standard Eiviva is 3.0 m wide. A wider arch suits a wider boat. Each extra 0.5 m adds 7% to the price of the arch. Your arch: 3.0 m.
Shape of the top
The top tubes of the front and rear frames, and the top of the U-shaped davit, run straight across. This is quicker to make, so it costs less.
More about this top
On the straight top, the top tube of each frame runs straight across between the two top bends. The side frames, panels and fittings are the same as on the curved top. Straight tube is quicker to cut, bend and weld, so this is the lower cost choice.
How it is fitted
The arch stands on its own feet, and the boat keeps its own pushpit around it. The U-shaped davit cannot be fitted, because the pushpit behind the arch is in the way when it lowers.
More about this fitting
Solar panels
Panels sit side by side across the top, overhanging the frame slightly at the front and back. Their size is chosen to suit your boat.
Dinghy davits
The U-shaped davit needs the arch joined to the pushpit. With a freestanding arch, the boat's own pushpit is in the way of the davit as it swings down. Choose “Joined to pushpit” above to fit it.
No davit. Davits can be added later.
More about this davit
A davit can be added later.
Equipment
A fork bracket for VHF and AIS aerials and a GPS antenna, on the side of the arch.
A post on the side of the arch with a plate that lifts the dish above the panels.
A post on the side of the arch with a plate for the radar dome.
A tall pole on the side of the arch, high enough to keep the blades clear of the crew and the panels.
A short socket clamped to the lower stern rail of the pushpit holds the ensign staff.
A separate tube cradle clamped to the back of the stern rails, so the liferaft hangs out over the water. A quick release lets the liferaft float free if the boat sinks. It cannot be fitted together with the pushpit seats.
Teak corner seats built into the stern rails. The front of each seat sits over the transom edge and the seat reaches out behind the boat. They cannot be fitted together with the liferaft cradle.
Installation
We make the arch and you, or your boatyard, fit it. Packing and delivery are quoted once we know where it is going.
Your setup
- Eiviva arch£4.800
- 3.0 m wide (standard)Included
- Straight topIncluded
- FreestandingIncluded
- Fittings for 2 solar panelsIncluded
- Supply only, no installationNo charge
£4.800+ VAT
Estimate. Final price confirmed after we check your measurements.
Supply only: you or your boatyard fit the arch. Would you like us to fit it further than 25 miles away? That is £960 + VAT a day for two fitters, plus travel and expenses.
Packing and delivery are quoted once we know where it is going. Outside the UK? Import VAT and duty are paid on arrival.
The guys were amazing all through the design and manufacture of the arch made for my Najad 490. The quality was fantastic and proved a valuable addition to the yacht. They consulted me at every stage and made sure I was happy with everything at every stage. Very skilled people at what they do.
Great service! Built us a beautiful arch with davits in 2 weeks, on budget. Very professional and good communication throughout. Highly recommend.
Rated 5 stars on Google
Green Innovator Award Winner
A question to ask any fabricatorHow many arches have you built? We have fitted more than 290.
Step 1 of 4. Sending a request is free. We check every design and send you a formal quote.
The Eiviva, Valkyrie, Dodger and Universal designs belong to Latbros Ltd.
Echte installaties
Bekijk de bogen die we hebben gebouwd
Elk ontwerp in de configurator is gebaseerd op bogen die op echte boten zijn geplaatst. Bekijk het afgewerkte werk, met foto's en reacties van eigenaren, voordat u uw aanvraag verstuurt.

Eiviva (hoge specificatie)
Moody 38

Valkyrie ontwerp (aangepast)
Najad 49 — Lahaina

Valkyrie ontwerp
Beneteau Oceanis 45
Liever eerst overleggen? Neem contact op




















